+(39) 0362 235074 +(39) 0362 1798550  info@armiratti.it
  •  36,00

    Martello Cinetico Frankford Arsenal

  •  29,90

    Martello Cinetico Topshot

  •  39,00

    RCBS Case Lube Kit

    Kit per la lubrificazione dei bossoli, comprendente un tappetino, il liquido per la lubrificazione e due spazzolini con un manico.

  •  34,00

    RCBS Collet Bullet Puller – Rimuovi Palla

    RCBS was founded over 60 years and has been producing high quality reloading equipment ever since. The RCBS Collet Bullet Puller is designed so the reloader can easily pull jacketed bullets from brass cases without damaging either. The puller utilizes standard 7/8″-14 threads so it will work almost any single stage reloading press. Just get the die setup in the press with the appropriate caliber collet (sold separately), place the cartridge with the bullet to be removed in the press, lift up the ram, then tighten the collet, lower the ram and the bullet is pulled out. No more hammering away with inertia bullet pullers to break down ammunition. Different caliber collets are sold separately (this unit does not ship with any collets). Not for use with non-jacketed bullets.

    Technical Information

    Type: Collet Bullet Puller
    Function: Pull bullets from cases
    Material: Steel
    Notes:

    • Not for use with lead bullets
    • This puller does not come with any collets, user must purchase the correct caliber collet for their application

     

  •  18,00

    RCBS Collet per Bullet Puller Cal. .22

    The RCBS Collet Bullet Puller is an excellent tool designed to help reloaders dismantle loaded ammunition to save valuable components. These collets are designed to easily pull out jacketed bullets without damaging them. These collets will only work with the standard RCBS Collet Bullet Puller. They are not compatible with the larger collet bullet puller designed to work in presses with 1″-14 threads.

    Technical Information

    Fits: RCBS 7/8″-14 thread Collet Bullet Puller
    Function: Collet grips the bullet as the press ram is lowered removing the bullet from the case
    Notes: Designed to pull jacketed bullets only

  •  18,00

    RCBS Collet per Bullet Puller Cal. .24 / 6 mm

    The RCBS Collet Bullet Puller is an excellent tool designed to help reloaders dismantle loaded ammunition to save valuable components. These collets are designed to easily pull out jacketed bullets without damaging them. These collets will only work with the standard RCBS Collet Bullet Puller. They are not compatible with the larger collet bullet puller designed to work in presses with 1″-14 threads.

    Technical Information

    Fits: RCBS 7/8″-14 thread Collet Bullet Puller
    Function: Collet grips the bullet as the press ram is lowered removing the bullet from the case
    Notes: Designed to pull jacketed bullets only

  •  18,00

    RCBS Collet per Bullet Puller Cal. .30 (.308 w.)

    The RCBS Collet Bullet Puller is an excellent tool designed to help reloaders dismantle loaded ammunition to save valuable components. These collets are designed to easily pull out jacketed bullets without damaging them. These collets will only work with the standard RCBS Collet Bullet Puller. They are not compatible with the larger collet bullet puller designed to work in presses with 1″-14 threads.

    Technical Information

    Fits: RCBS 7/8″-14 thread Collet Bullet Puller
    Function: Collet grips the bullet as the press ram is lowered removing the bullet from the case
    Notes: Designed to pull jacketed bullets only

  •  18,00

    RCBS Collet per Bullet Puller Cal. .30 / 7,35 mm

    The RCBS Collet Bullet Puller is an excellent tool designed to help reloaders dismantle loaded ammunition to save valuable components. These collets are designed to easily pull out jacketed bullets without damaging them. These collets will only work with the standard RCBS Collet Bullet Puller. They are not compatible with the larger collet bullet puller designed to work in presses with 1″-14 threads.

    Technical Information

    Fits: RCBS 7/8″-14 thread Collet Bullet Puller
    Function: Collet grips the bullet as the press ram is lowered removing the bullet from the case
    Notes: Designed to pull jacketed bullets only

  •  18,00

    RCBS Collet per Bullet Puller Cal. .35 / .38

    The RCBS Collet Bullet Puller is an excellent tool designed to help reloaders dismantle loaded ammunition to save valuable components. These collets are designed to easily pull out jacketed bullets without damaging them. These collets will only work with the standard RCBS Collet Bullet Puller. They are not compatible with the larger collet bullet puller designed to work in presses with 1″-14 threads.

    Technical Information

    Fits: RCBS 7/8″-14 thread Collet Bullet Puller
    Function: Collet grips the bullet as the press ram is lowered removing the bullet from the case
    Notes: Designed to pull jacketed bullets only

  •  36,00

    RCBS Martello Cinetico

    Martello cinetico RCBS, per “scaricare” le munizioni

  •  8,30

    RCBS Primer Tray

    The RCBS Primer turning tray is designed to fit the shape of today’s larger primer package quantities. The square shape makes it easier to handle while the grooved tray surface quickly positions primers anvil-side up. Tray is 4″ square and will hold 100 primers.

    Technical Information

    Function: Primer turning tray
    Material: Plastic
    Notes: positions primers anvil-side up

  •  18,30

    RCBS Tavoletta Universale Porta Colpi – per 50 Bossoli

    The RCBS Universal Reloading Tray is a great tray for any reloading bench. The double-sided design has 25 holes on each side for a variety of different calibers.

    Technical Information

    Material: Plastic
    Notes: Double-sided
    Fits: Fits most calibers from 17 to 48 including WSM, WSSM and Ultra Mag cartridges

  •  212,00

    RCBS Uniflow Competition Powder Measure Rifle

    RCBS® Competition Powder Measures accurately meter, by volume, all types of smokeless powder—ball, flake or cylindrical (stick). The pistol/small rifle model measures .5 to 40 grains, the rifle model meters 10 to 110 grains, and the combo unit handles both ranges. The units combine the proven Uniflow™ Powder Measure, which features a precision-ground metering drum and honed main casting, with a powder baffle and Micrometer Adjustment Screw. The Powder Baffle controls the powder flow and the pressure of the powder column on the metering unit. The Micrometer Adjustment Screw allows precise adjustments to the metered charge and lets reloaders record the number for future reference. The handle can be positioned on the right or left side. Note: The Competition Powder Measure should be used in conjunction with an accurate powder scale for setting the original charge and for checking charges occasionally during the run. Do NOT use with black powder.

Utilizzando il sito, accetti l'utilizzo dei cookie da parte nostra. maggiori informazioni

Questo sito utilizza i cookie per fornire la migliore esperienza di navigazione possibile. Continuando a utilizzare questo sito senza modificare le impostazioni dei cookie o cliccando su "Accetta" permetti il loro utilizzo.

Chiudi