+(39) 0362 235074 +(39) 0362 1798550  info@armiratti.it
  •  24,00

    Calibro Digitale

  •  179,00

    Frankford Arsenal EZ Extreme Sonic Cleaner

    Frankford Arsenal Ultrasonic Cleaners were specifically designed to deliver state of the art cleaning for brass and other firearm parts using high frequency ultrasonic agitation. This allows the cleaner to clean brass and parts inside and out with no noise or mess. A removable basket makes it very convenient to drain and rinse components.

    Technical Information:

    Voltage: 110 Volt
    Capacity: 2 Liters
    Workload Capacity: Up to 350 223 Remington Cases
    Solution Included: No

  •  89,00

    Frankford Arsenal EZ Sonic Cleaner 50 Watt

    The EZ Sonic Cleaner is the perfect size ultrasonic cleaner for the financially cautious shooter. It has the majority of the features of the Extreme Sonic Cleaner and gives you the most bang for your buck. Great cleaning power with moderate sized capacities makes it a perfect cleaner for the average shooter. Eliminate the frustration of cleaning primer pockets or small parts and appreciate all the benefits of ultrasonic cleaning with an EZ Sonic Cleaner!

    • Tank size of 5.8″ x 4.8″ x 1.9″
    • Capacity of .75L.
    • capable of cleaning approx. 125 pieces of .223 brass per batch
    • 30 watt unit at 42KHz
  •  26,00

    Frankford Arsenal Graniglia in Barattolo

  •  61,00

    Frankford Arsenal Micrometro

  •  36,00

    Frankford Arsenal Soluzione per Pulizia Bossoli (per lavatrice ad ultrasuoni)

    Utilizzo: 1 parte di soluzione in 40 parti d’acqua

  •  185,00

    Hornady Concentricity Tool

    Make bullet runout a thing of the past with the new Hornady Ammunition Concentricity Tool.

    Hornady never ceases to find ways to provide unmatched accuracy in every facet of the shooting experience. The new Ammunition Concentricity Tool is the first tool on the market to both identify and eliminate bullet runout. Just place ammunition in the tool, roll it, identify runout, and use the dial indicator to adjust runout to zero! It can be used to true-up factory ammunition, too.

  •  27,50

    L.E.M. Busta Micro Aghi

  •  28,00

    L.E.M. Recuperatore di Aghi

    recuperatore di aghi per lavabossoli L.E.M.

  •  399,00

    Lavabossoli L.E.M. Base

    Versione base della lavabossoli L.E.M.  comprensiva di:

    – Macchina lavabossoli, struttura di acciaio verniciato, motore con potenza di 180 w.
    – Vasca cilindrica in plastica- Coperchio ermetico
    – Busta microaghi
    – Cavo alimentazione con interruttore luminoso e fusibile
    – Istruzioni d’uso con avvertenze (complete di adesivo sulla macchina)
    N.B.: non è incluso il recuperatore di aghi

     

  •  498,00

    Lavabossoli L.E.M. Deluxe

    Versione deluxe della lavabossoli L.E.M.  comprensiva di:

    – Macchina lavabossoli, struttura di acciaio verniciato, motore con potenza di 250 w (per uso intensivo)
    – Velocità regolabile con integrato programma di lavaggio a bassi giri
    – Vasca cilindrica in plastica- Coperchio ermetico
    – Busta microaghi
    – Cavo alimentazione con interruttore luminoso e fusibile
    – Istruzioni d’uso con avvertenze (complete di adesivo sulla macchina)
    N.B.: non è incluso il recuperatore di aghi

  •  450,00

    Lavabossoli L.E.M. Plus

    Versione Plus della lavabossoli L.E.M.  comprensiva di:

    – Macchina lavabossoli, struttura di acciaio verniciato, motore con potenza di 250 w (dedicato ad uso
    intensivo)
    – Vasca cilindrica in plastica- Coperchio ermetico
    – Busta microaghi
    – Cavo alimentazione con interruttore luminoso e fusibile
    – Istruzioni d’uso con avvertenze (complete di adesivo sulla macchina)
    N.B.: non è incluso il recuperatore di aghi

  •  6,20

    Lee Case Length Gage and Shell Holder Cal. .22

    The Lee Case Length Gage is a precise and easy way to trim brass cases to length and square the case mouth. Requires a Lee Cutter and Lock Stud to function.

    The first step to successfully trimming brass cases with the Lee Case Length Gage and Shellholder is to take the Lee Lock Stud (sold separately) and screw it into the shell holder. Next the Length Gage needs to be screwed into the Case Trimmer Cutter (sold separately). The length gage is set to cut each case within SAAMI specifications. After the tools are screwed together the next step is case trimming. Just put the empty brass into the shellholder, insert the case length gage into the empty piece of brass and turn the cutter until the piece of brass is trimmed to the predetermined length. It is that easy to get consistent case lengths and square case mouths helping to keep reloaded ammunition as accurate as possible.

    Technical Information

    Material: Hardened Steel
    Features: Caliber specific Shellholder and length gage
    Notes: Cutter and Lock Stud (476-992) Sold Separately
    Special Note: The Large Cutter and Lock Stud (153-052) is required for .475 and larger calibers (Sold Separately)

  •  6,20

    Lee Case Length Gage and Shell Holder Cal. .223 Remington

    The Lee Case Length Gage is a precise and easy way to trim brass cases to length and square the case mouth. Requires a Lee Cutter and Lock Stud to function.

    The first step to successfully trimming brass cases with the Lee Case Length Gage and Shellholder is to take the Lee Lock Stud (sold separately) and screw it into the shell holder. Next the Length Gage needs to be screwed into the Case Trimmer Cutter (sold separately). The length gage is set to cut each case within SAAMI specifications. After the tools are screwed together the next step is case trimming. Just put the empty brass into the shellholder, insert the case length gage into the empty piece of brass and turn the cutter until the piece of brass is trimmed to the predetermined length. It is that easy to get consistent case lengths and square case mouths helping to keep reloaded ammunition as accurate as possible.

    Technical Information

    Material: Hardened Steel
    Features: Caliber specific Shellholder and length gage
    Notes: Cutter and Lock Stud (476-992) Sold Separately
    Special Note: The Large Cutter and Lock Stud (153-052) is required for .475 and larger calibers (Sold Separately)

  •  6,20

    Lee Case Length Gage and Shell Holder Cal. .308 Winchester

    The Lee Case Length Gage is a precise and easy way to trim brass cases to length and square the case mouth. Requires a Lee Cutter and Lock Stud to function.

    The first step to successfully trimming brass cases with the Lee Case Length Gage and Shellholder is to take the Lee Lock Stud (sold separately) and screw it into the shell holder. Next the Length Gage needs to be screwed into the Case Trimmer Cutter (sold separately). The length gage is set to cut each case within SAAMI specifications. After the tools are screwed together the next step is case trimming. Just put the empty brass into the shellholder, insert the case length gage into the empty piece of brass and turn the cutter until the piece of brass is trimmed to the predetermined length. It is that easy to get consistent case lengths and square case mouths helping to keep reloaded ammunition as accurate as possible.

    Technical Information

    Material: Hardened Steel
    Features: Caliber specific Shellholder and length gage
    Notes: Cutter and Lock Stud (476-992) Sold Separately
    Special Note: The Large Cutter and Lock Stud (153-052) is required for .475 and larger calibers (Sold Separately)

Utilizzando il sito, accetti l'utilizzo dei cookie da parte nostra. maggiori informazioni

Questo sito utilizza i cookie per fornire la migliore esperienza di navigazione possibile. Continuando a utilizzare questo sito senza modificare le impostazioni dei cookie o cliccando su "Accetta" permetti il loro utilizzo.

Chiudi