+(39) 0362 235074 +(39) 0362 1798550  info@armiratti.it
  •  69,00

    RCBS 2 Die Set Rifle Cal. .223 Remington

    Shell Holder NON incluso

    RCBS has been making some of the best reloading equipment for over 60 years. Their 2-Die sets are known in many reloading circles for their high-quality. Each 2-Die Set includes a full length sizer die has an expander-decapping unit to remove the spent primer while expanding the case mouth. Vent holes prevent case damage caused by trapped air or excessive lubricant. The seater die includes a bullet seater plug and built-in roll or taper crimp as appropriate for the particular cartridge. Shellholders sold separately.

  •  69,00

    RCBS 2 Die Set Rifle Cal. .308 Winchester

    Shell Holder NON incluso

    RCBS has been making some of the best reloading equipment for over 60 years. Their 2-Die sets are known in many reloading circles for their high-quality. Each 2-Die Set includes a full length sizer die has an expander-decapping unit to remove the spent primer while expanding the case mouth. Vent holes prevent case damage caused by trapped air or excessive lubricant. The seater die includes a bullet seater plug and built-in roll or taper crimp as appropriate for the particular cartridge. Shellholders sold separately.

  •  34,00

    RCBS Collet Bullet Puller – Rimuovi Palla

    RCBS was founded over 60 years and has been producing high quality reloading equipment ever since. The RCBS Collet Bullet Puller is designed so the reloader can easily pull jacketed bullets from brass cases without damaging either. The puller utilizes standard 7/8″-14 threads so it will work almost any single stage reloading press. Just get the die setup in the press with the appropriate caliber collet (sold separately), place the cartridge with the bullet to be removed in the press, lift up the ram, then tighten the collet, lower the ram and the bullet is pulled out. No more hammering away with inertia bullet pullers to break down ammunition. Different caliber collets are sold separately (this unit does not ship with any collets). Not for use with non-jacketed bullets.

    Technical Information

    Type: Collet Bullet Puller
    Function: Pull bullets from cases
    Material: Steel
    Notes:

    • Not for use with lead bullets
    • This puller does not come with any collets, user must purchase the correct caliber collet for their application

     

  •  69,00

    RCBS Die Set Rifle Cal. .338 Lapua Magnum

    Shell Holder NON incluso

    RCBS has been making some of the best reloading equipment for over 60 years. Their 2-Die sets are known in many reloading circles for their high-quality. Each 2-Die Set includes a full length sizer die has an expander-decapping unit to remove the spent primer while expanding the case mouth. Vent holes prevent case damage caused by trapped air or excessive lubricant. The seater die includes a bullet seater plug and built-in roll or taper crimp as appropriate for the particular cartridge. Shellholders sold separately.

  •  96,00

    RCBS Dies Pistol Set Cal. .38 Special / .357 Magnum

    Shell Holder NON incluso

    Made from polished and heat-treated steel, the RCBS Carbide 3-Die Set has a Sizer Die with Decapping Unit, Expander Die for expanding and belling the case mouth and a Seater Die for seating and crimping the bullet (Straight wall cases will roll crimp, unless the description indicates it has a taper crimp). No sizing lube is needed with these carbide dies. Shellholder sold separately. Comes with a plastic storage case and Lifetime Guarantee from RCBS

  •  96,00

    RCBS Dies Pistol Set Cal. .40 S&W / 10 mm Auto

    Shell Holder NON incluso

    Made from polished and heat-treated steel, the RCBS Carbide 3-Die Set has a Sizer Die with Decapping Unit, Expander Die for expanding and belling the case mouth and a Seater Die for seating and crimping the bullet (Straight wall cases will roll crimp, unless the description indicates it has a taper crimp). No sizing lube is needed with these carbide dies. Shellholder sold separately. Comes with a plastic storage case and Lifetime Guarantee from RCBS

  •  96,00

    RCBS Dies Pistol Set Cal. .45 ACP

    Shell Holder NON incluso

    Made from polished and heat-treated steel, the RCBS Carbide 3-Die Set has a Sizer Die with Decapping Unit, Expander Die for expanding and belling the case mouth and a Seater Die for seating and crimping the bullet (Straight wall cases will roll crimp, unless the description indicates it has a taper crimp). No sizing lube is needed with these carbide dies. Shellholder sold separately. Comes with a plastic storage case and Lifetime Guarantee from RCBS

  •  96,00

    RCBS Dies Pistol Set Cal. 9×21 IMI

    Shell Holder NON incluso

    Made from polished and heat-treated steel, the RCBS Carbide 3-Die Set has a Sizer Die with Decapping Unit, Expander Die for expanding and belling the case mouth and a Seater Die for seating and crimping the bullet (Straight wall cases will roll crimp, unless the description indicates it has a taper crimp). No sizing lube is needed with these carbide dies. Shellholder sold separately. Comes with a plastic storage case and Lifetime Guarantee from RCBS

  •  43,00

    RCBS Neck Sizer Cal. .223 Remington

    RCBS Neck Sizer Dies size only the neck of case (not the shoulder or body) just enough to snugly hold the bullet which leads to increase case life and accuracy.

    Technical Information

    Material: Steel

    Die Type:

    • Neck Sizer Die (with expander-decapping unit)

    Accessories:

    • Plastic Storage Case

    Notes:

    • Neck Sizer Dies size only the neck of the case (NOT the shoulder or body) just enough to snugly hold the bullet for extended case life and accuracy

     

  •  265,00

    RCBS Neck Sizer Die Cal. .416 Barrett

    Neck Sizer Dies resize only the neck of case just enough to snugly hold the bullet. This leaves the shoulder and body at their fire-formed dimensions which leads to longer case life and increased accuracy. For use with bolt action rifles only. New brass must be full length sized and fired before it can be neck sized.

    Technical Information

    Material: Steel

    Die Type:

    • Neck Sizer Die (with expander-decapping unit)
    • Shellholder sold separately.

     

  •  416,00

    RCBS Rifle Die Set Cal. .416 Barrett

    RCBS has been making some of the best reloading equipment for over 60 years. Their 2-Die sets are known in many reloading circles for their high-quality. Each 2-Die Set includes a full length sizer die has an expander-decapping unit to remove the spent primer while expanding the case mouth. Vent holes prevent case damage caused by trapped air or excessive lubricant. The seater die includes a bullet seater plug and built-in roll or taper crimp as appropriate for the particular cartridge. Shellholders sold separately.

    Technical Information

    Material:

    • Polished and Heat Treated Steel

    Accessories:

    • Plastic Storage Case

    Notes:

    • Lifetime Guarantee from RCBS

     

  •  27,50

    RCBS Taper Crimp Seater Die Cal. .38 Special / .357 Magnum

    This die seats the bullet in the case, and then gently squeezes the case around the bullet, forming a perfect taper crimp. Like all RCBS dies, these dies are carefully machined to exacting tolerances, then hardened and hand finished. The result is a quality reloading die that will offer a lifetime of use.

    Technical Information

    Material: Steel

    Die Type Included:

    • Taper Crimp Seater Die

      Accessories:

    • Plastic storage case

      Notes:

    • The crimp gently tapers tighter and tighter to hold the bullet in place.
    • It does not affect the overall length of the cartridge.
    • This is very important for semi-automatics where the cartridge headspaces on the case mouth.
    • A Bullet seater is used to push (seat) the bullet down into the case to a specific depth.

     

  •  27,50

    RCBS Taper Crimp Seater Die Cal. 9 Luger / 9×21 IMI

    This die seats the bullet in the case, and then gently squeezes the case around the bullet, forming a perfect taper crimp. Like all RCBS dies, these dies are carefully machined to exacting tolerances, then hardened and hand finished. The result is a quality reloading die that will offer a lifetime of use.

    Technical Information

    Material: Steel

    Die Type Included:

    • Taper Crimp Seater Die

      Accessories:

    • Plastic storage case

      Notes:

    • The crimp gently tapers tighter and tighter to hold the bullet in place.
    • It does not affect the overall length of the cartridge.
    • This is very important for semi-automatics where the cartridge headspaces on the case mouth.
    • A Bullet seater is used to push (seat) the bullet down into the case to a specific depth.

     

Utilizzando il sito, accetti l'utilizzo dei cookie da parte nostra. maggiori informazioni

Questo sito utilizza i cookie per fornire la migliore esperienza di navigazione possibile. Continuando a utilizzare questo sito senza modificare le impostazioni dei cookie o cliccando su "Accetta" permetti il loro utilizzo.

Chiudi